C.E.T. - PFP-11hpHND-FL - 11 H.P. Honda Floating Pump

C.E.T. - PFP-11hpHND-FL - 11 H.P. Honda Floating Pump
Item# CET_PFP11HPHNDFL
$2,235.00

Product Description

**FREIGHT CHARGES TO ONE DESTINATION(CONTINENTAL USA) ARE INCLUDED IN THE PRICING OF ALL C.E.T. PUMPS**

ENGINE SPECIFICATIONS: • Honda 11hp at 3600 RPM, air cooled engine. • Single cylinder gasoline engine. • Manual recoil start. • 2 quarts (2 l) integrated fuel tank.

PUMP UNIT SPECIFICATIONS: • Direct drive C.E.T. single stage centrifugal pump. • Pump body made from resistant aluminum alloy. • Bronze impeller. • Mechanical shaft seal. • Self-priming system. • One 2 1/2” (65 mm) delivery outlet. • One 3 ” (77 mm) suction inlet floater. • Light weight heavy duty floater. • Low oil alert. • Dimensions : Length : 32 1/4” (819 mm); Width : 30” (762 mm); Height : 22 1/8” (561 mm). • Weight : 120 lbs (54 kg).

PERFORMANCE:

405 GPM (1531 LPM) @ 10 PSI (0.7 bar).

310 GPM (1172 LPM) @ 25 PSI (1.7 bar).

190 GPM (718 LPM) @ 50 PSI (3.5 bar.)

90 GPM (340 LPM) @ 75 PSI (5.2 bar).

Your pump comes with a full year warranty on all mechanical components.

DOS AND DONTS: Do… • Read your Honda owner’s manual. • Stop your pump before fuelling.

Do Not: • Let your pump freeze up with water in it (drain the casing ) • Allow sand in the suction, it will damage the wear ring and the mechanical seal (use floating strainer if water supply doubtful) • Run your pump dry for more than 2 minutes at idle (prime as soon as possible) • Use your pump with less than 8 in of water below the inlet of the suction hose • Allow your pump to run without surveillance