**Freight cost is included in the price for this item**
‹› 8” Blade.
25 ft. of 8" duct.
‹› 2 Carry Handles.
‹› Can be Used for Negative or Positive Pressure Operations.
‹› Duct can be Attached to Either End.
‹› 5 Year Warranty.
‹› 1/3 Hp, TEAO ( Totally Enclosed Air Over), 60/50hz, 110 VAC.
‹› 11.5” x 10.75” x 16” ‹› 292mm x 273mm x 406mm
‹› 8” ‹› 203mm.
‹› 20 lbs ‹› 9 kg.
‹› 1037 cfm ‹› 1760 cm.
ELECTRIC CONFINED SPACE FAN:
A Super Vac Nano P8S, 8” electric confined space fan shall be supplied. The unit
shall feature a square construction design for strength and stability. The unit shall
be designed with two (2) carrying handles on each corner for easy positioning
and rapid deployment. All components of the fan shall 100% manufactured and
assembled in the United States.
The confined space fan shall be powered by a 1/3 Horsepower electric motor
that is Total Enclosed Air Over (TEAO) type design. The unit shall be operational
with 110 volt systems.
The entire housing of the unit shall be constructed of weather and corrosion
resistant, high impact polyethylene with a full aluminum liner and aluminum
handles for strength. The blade shall be constructed of Durethan BKV
25 H3.0 and rated from -40° C to +95° C. The blade shall be precision balanced
and attached to the engine shaft for a direct drive connection. Any fan utilizing
belts, pulley, gears, or additional shafts shall not be acceptable.
The front and rear safety guards shall be designed to OSHA and U.L. Standards
to prevent accidental contact with the blade.
The unit shall be designed to accept a ventilation air duct to either the inlet or
outlet side of the fan. The unit shall be designed to be used in conjunction with
either a spiral or “L” air without any additional adapters required.
The confined space fan shall be designed with the following:
Motor Manufacturer: Bluffton Electric Motor
Horsepower: 1/3 HP
Voltage: 110 V
Air Movement: 1037 CFM at 60 Hz, 864 CFM at 50 Hz
Dimensions: 11.50 High x 10.75 Wide x 16.00 Deep, inch
Weight: 20 lbs
The confined space fan shall have a minimum five (5) year warranty. The motor
shall be warranted by the motor manufacturer for a minimum of two (2) year
A Super Vac, standard duct for Nano shall be supplied. The duct shall be
constructed from a single ply neoprene impregnated polyester material and is
supported by a continuous spring steel wire helix. The duct shall come with built in
carry bag that duct contracts into for easy transportation.
Material shall be rated to with stand temperatures ranging from -40 to 250 F.
Heavy duty vinyl wearstrip with self adhering neoprene backing, approximately
25-27 oz square yard.
Abrasion resistance of 18,000 cycles from H-22 wheel with
1000 gram load (FSTM 191 Method 5306).
A Class 1 hard drawn spring steel wire helix that conforms to ASTM 227.
specifications shall be in place to support the duct.
The duct shall have produced to UL94-V-O flame retardancy specifications / MINS
540-106-1 (Mare Island Naval Shipyard) / California T-19 / NFPA 701 - Large Scale.
The duct shall weigh no more than 1 lb per foot of duct and have a bend radius of